The Knikmops KM 180 is a multi-deployable articulated loader developed by Gebroeders Geens with plenty of power under the hood but a low unladen weight (1800 kg) to make it transportable. The Knikmops KM 180 will lift 1470 kg as an outcome of this. With a throughput of 50 l/min and a maximum pressure of 180 bar, the machine can carry and operate a nearly infinite number of attachments. The standard width of the Knikmops KM 180 is approximately 1.4 m. Furthermore, when employing this multifunctional articulated loader, a Knikmops operator can rely on horsepower of 32.4 kW (43 hp). It also comprises four independent hydromotors on the wheels, that provide continuous four-wheel drive. This drive can be switched electronically or managed by a difflock. At a construction site or in the garden, this Knikmops with easy steering is a tremendous asset.
Knikmops KM 180 has recently had a comprehensive overhaul to satisfy the most contemporary emissions standards. As a consequence, the Knikmops developed a user-friendly dashboard and a particulate filter was incorporated into the chassis. The Knikmops KM 180 is set up so that particulate filter renewal occurs during a job, hence the Knikmops operator only needs to be notified of any abnormalities. A simple digital dashboard is used for this. So, even with the most recent technological advancements, anyone could use these Knikmops. As a result, the core Knikmops values can be easily managed. Compact, adaptable, and long-lasting The strong steel chassis was designed for tough jobs. Workers can receive genuine assistance from a helper like Knikmops as a result of this. Landscapers who need to travel between sites frequently would welcome this vehicle.
Technical Specifications
Description | KM180 | |
Wheelbase | A | 1770mm |
Chassis Length | B | 2990mm |
Total length with shovel bucket | C | 3800mm |
Overall width | D | 1335/1400mm |
Shovel bucket width | E | 1400/1500mm |
Maximum turning angle | F | 50 Degrees |
Turning radius outside edge | G | 2760mm |
Rollbar height / ROPS FOPS height | H | 2300/2380mm |
Seat height | I | 1340mm |
Ground clearance | J | 335mm |
Tipping-in angle from ground surface | K | 30 Degrees |
Arm hinge height | L | 1335mm |
Transfer height | M | 2230mm |
Shovel bucket rotation point, maximum | N | 2405mm |
Fuel tank capacity | 45 Litres | |
Diesel engine type (Kubota) | 3TNV86CT | |
Engine power | 32.4/43kw/pk | |
Number of cylinders | 3 | |
Drive hydraulics | Plungerpump | |
Wheeldrive | Plungermotor | |
Output of work hydraulics | 50L/min | |
Pressure of work hydraulics | 180bar | |
Curbweight without attachment | 1800kg | |
Lifting force | 1400kg | |
Breakout force | 1250kg | |
Topspeed | 20km/h | |
KM180 Lift capacity | 1 | 1470kg |
2 | 1180kg | |
3 | 880kg |
Description | KM180TE | |
Wheelbase | A | 1850mm |
Chassis Length | B | 3240mm |
Total length with shovel bucket | C | 4075mm |
Overall width | D | 1335/1400mm |
Shovel bucket width | E | 1400/1500mm |
Maximum turning angle | F | 50 Degrees |
Turning radius outside edge | G | 2760mm |
Rollbar height / ROPS FOPS height | H | 2300/2380mm |
Seat height | I | 1340mm |
Ground clearance | J | 335mm |
Tipping-in angle from ground surface | K | 30 Degrees |
Arm hinge height | L | 1365mm |
Transfer height | M | 2490/3140mm |
Shovel bucket rotation point, maximum | N | 2660/3310mm |
Fuel tank capacity | 45 Litres | |
Diesel engine type (Kubota) | 3TNV86CT | |
Engine power | 32.4/43kw/pk | |
Number of cylinders | 3 | |
Drive hydraulics | Plungerpump | |
Wheeldrive | Plungermotor | |
Output of work hydraulics | 50L/min | |
Pressure of work hydraulics | 180bar | |
Curbweight without attachment | 2200kg | |
Lifting force | 1300kg | |
Breakout force | 940kg | |
Topspeed | 20km/h | |
KM180TE Lift capacity - Telescopic arm in | 1 | 1240kg |
2 | 1150kg | |
3 | 820kg | |
KM180TE Lift capacity - Telescopic arm out | 1 | 880kg |
2 | 710kg | |
3 | 610kg |