Willsi Power - Knikmops - KM140E - Electric

Gebroeders Geens, the parent company of Knikmops and Rollmops, proudly displays their electrical articulated loader. The Knikmops KM 140 E has the same power as the Knikmops KM 140 but it does not discharge any emissions.

Gebroeders Geens NV set out to find an energy-efficient electrical articulated loader. This would facilitate employing a smaller battery pack. It has a number of advantages, including less weight, reduced charging time, and, most importantly, lower price.

This is because your electronic articulated loader’s battery is the most expensive component. The final product was Knikmops KM 140 E.

Standard Endurance

This Belgian designer has now provided the market to not one, but two carbon-free solutions for organizations. The Knikmops KM 140 E Standard is powered by a 20 kWh battery that lasts for an average of 5 hours of hard work. From zero to 80 percent, it takes an hour to charge, or 45 minutes if you use the rapid charger.

Gebroeders Geens has the Knikmops KM 140 E Endurance if you want to work with your Knikmops for a long period of time. The Knikmops operator can work for almost 8 hours on the 30 kWh battery, and the quick charger can charge the battery in 2 hours and 30 minutes.

Users can now choose the best electric Knikmops for their particular needs.

Knikmops’ unmistakable power is still present. The lifting capacity of this articulated loader is about 1500 kg, which is comparable to that of its diesel counterpart, the new Knikmops KM 140. Operators will be impressed by the Knikmops KM 140 E’s driving speed at 16 km/h.

  • Low loading arm pivot point, leading to an improved operator view and a machine that is considerably more stable.
  • Easy to transport as a result of low dead weight.
  • Hydrostatic four-wheel drive.
  • Extra powerful hydraulic motors.
  • Hydraulic hand-brake.
  • Very easy to operate.
  • Plenty of room to get on and off.
  • The high traveling speed of 16 kph!
  • The low dead weight of 1,600 kg!

Technical Specifications

KM140E
DescriptionKM140E
WheelbaseA1600mm
Chassis LengthB2710mm
Total length with shovel bucketC3390mm
Overall widthD950/1350mm
Shovel bucket widthE1000/1270mm
Maximum turning angleF47 Degrees
Turning radius outside edgeG2400mm
Rollbar height / ROPS FOPS heightH2170/2260mm
Seat heightI1270mm
Ground clearanceJ315mm
Tipping-in angle from ground surfaceK30 Degrees
Arm hinge heightL1230mm
Transfer heightM1975mm
Shovel bucket rotation point, maximumN2145mm
Battery Size20kWh
Average working time5 Hours
Average charging time (80%)1h 45mins
Drive hydraulicsPiston pump
WheeldrivePiston engine
Output of work hydraulics48L/min
Pressure of work hydraulics180bar
Operating weight without additional unit1550kg
Lifting force1150kg
Breakout force955kg
Topspeed16km/h
KM140E Lift capacity11260kg
2970kg
3740kg
KM140E Endurance
DescriptionKM140E
WheelbaseA1600mm
Chassis LengthB2710mm
Total length with shovel bucketC3390mm
Overall widthD950/1350mm
Shovel bucket widthE1000/1270mm
Maximum turning angleF47 Degrees
Turning radius outside edgeG2400mm
Rollbar height / ROPS FOPS heightH2170/2260mm
Seat heightI1270mm
Ground clearanceJ315mm
Tipping-in angle from ground surfaceK30 Degrees
Arm hinge heightL1230mm
Transfer heightM1975mm
Shovel bucket rotation point, maximumN2145mm
Battery Size30kWh
Average working time8 Hours
Average charging time (80%)2h 30mins
Drive hydraulicsPiston pump
WheeldrivePiston engine
Output of work hydraulics48L/min
Pressure of work hydraulics180bar
Operating weight without additional unit1550kg
Lifting force1150kg
Breakout force955kg
Topspeed16km/h
KM140E not articulated11260kg
2970kg
3740kg